Membru din: 11 Noi 2009, 19:24
Mesaje: 286
Localitate: Miami, Florida
I am going to have to use plans to make ribs. This is the one part I have never been able to do from prints. I always break the balsa at some point. What is the best method of making intricate parts in balsa from prints?
_________________ "SAVE ALL THE PIECES"-Phil Brown
Membru din: 30 Oct 2007, 19:56
Mesaje: 1975
Localitate: Bucuresti
If the carbon paper became obsolete, you can use printers or photocopies. If the printer is a jet one (ink), apply the paper on the balsa sheet and whet it with acetone. It will act same as a carbon paper, transfering the drawing from the paper to the wood (of course, the drawing have to be mirrored/flipped first, for special shapes...for ribs no need it). If the printer it's laser or a photocopy machine (toner), instead of acetone, use a hot (modelling or not) iron in order to transfer the drawing from the paper direct to the wood. I am doing this usualy to make a pair of templates and after, using these two templates I make a sandwich with balsa ribs and finishing all of them with a block sand paper. For an acurated job, use a soft pencil ( 2B-4B ) to make the edges of the templates, black. You will know when you have to stop because the black part will be erased by the sand paper.
Membru din: 30 Oct 2007, 19:56
Mesaje: 1975
Localitate: Bucuresti
Garf scrie:
I understand that some sort of spray glue is used to attach the pattern to the balsa. Exactly what is it and where is it sold?
Nothing fancy, usualy it can be white glue diluted with watter. If you want something exotic, try 3M. I am using the 3M spray in order to fix the silkspan on a regular paper, to print diffrent things (laser or jet printing).
Utilizatorii ce navighează pe acest forum: Niciun utilizator înregistrat şi 2 vizitatori
Nu puteţi scrie subiecte noi în acest forum Nu puteţi răspunde subiectelor din acest forum Nu puteţi modifica mesajele dumneavoastră în acest forum Nu puteţi şterge mesajele dumneavoastră în acest forum Nu puteţi publica fişiere ataşate în acest forum