Membru din: 11 Noi 2009, 19:24
Mesaje: 286
Localitate: Miami, Florida
I am started on the assembly of NoblARF #3. This will have a Fox 35 built using a 60th anniversary case, Plasma P&C from Tony Cincotta in Australia, and MAYBE a Super Stunt NVA. I say maybe because the cowling most likely won't go around it.
_________________ "SAVE ALL THE PIECES"-Phil Brown
Membru din: 11 Noi 2009, 19:24
Mesaje: 286
Localitate: Miami, Florida
The plane is complete except for the cowling, which will be added after a few flights. The motor has plenty of power, but is not smooth. It should improve with some running.
_________________ "SAVE ALL THE PIECES"-Phil Brown
Membru din: 11 Noi 2009, 19:24
Mesaje: 286
Localitate: Miami, Florida
The first flight resulted in a clogged filter after 3 laps. After adding a 1/4 scale filter and a new NVA, I put up a complete flight. I need to tweak the flaps to level the wings.
_________________ "SAVE ALL THE PIECES"-Phil Brown
Membru din: 11 Noi 2009, 19:24
Mesaje: 286
Localitate: Miami, Florida
Due to the controls hanging up because of a jamb nut backing off, The NoblARF #3 has crashed breaking the motor mounts at the rear holes. Time for a new fuselage.
_________________ "SAVE ALL THE PIECES"-Phil Brown
Membru din: 11 Noi 2009, 19:24
Mesaje: 286
Localitate: Miami, Florida
I finally got around to fixing the NoblARF's with broken motor mounts. I cut above and below the mounts, then removed the stubs. Then I took replacement stock and fitted it to the opening. Now I will glue the mount to plywood, then glue the assembly to the fuselage side. When dry, I will take my air sander and shape the front end. This could be fun.
Utilizatorii ce navighează pe acest forum: Niciun utilizator înregistrat şi 18 vizitatori
Nu puteţi scrie subiecte noi în acest forum Nu puteţi răspunde subiectelor din acest forum Nu puteţi modifica mesajele dumneavoastră în acest forum Nu puteţi şterge mesajele dumneavoastră în acest forum Nu puteţi publica fişiere ataşate în acest forum