Marinaru

  
Forumul celor putini.  
Acum este 29 Mar 2024, 08:04

Ora este UTC + 2




Scrie un subiect nou Răspunde la subiect  [ 8 mesaje ] 
Autor Mesaj
 Subiectul mesajului:
MesajScris: 21 Dec 2009, 22:45 
Neconectat
Member

Membru din: 11 Noi 2009, 19:24
Mesaje: 286
Localitate: Miami, Florida
I have several OS Max 35S engines that have play between the wrist pin and piston. Is it better to ream the piston for an oversize pin, or bush the piston?

_________________
"SAVE ALL THE PIECES"-Phil Brown


Sus
 Profil  
 
 Subiectul mesajului:
MesajScris: 22 Dec 2009, 16:56 
Neconectat
Site Admin
Avatar utilizator

Membru din: 30 Oct 2007, 19:56
Mesaje: 1975
Localitate: Bucuresti
Garf scrie:
I have several OS Max 35S engines that have play between the wrist pin and piston. Is it better to ream the piston for an oversize pin, or bush the piston?

I know about some usualy problems on this tipe of engine, regarding the conrod's ends. In your situation, if you just simply ream the piston and conrod a little bit (not to much, just to ensure a round hole), it will be ok, but you will need a new oversized wrist pin. You can adapt a new one (wrist pin), using a simple tail cuted from a drill. In my opinion, bushing an iron piston is not a good ideea, you have not enough space inside, compared with an aluminium piston, wich it have a solide structure and enough space for bushes.

_________________
Magelan, cu rabdare si ciocan!


Sus
 Profil  
 
 Subiectul mesajului:
MesajScris: 23 Dec 2009, 00:52 
Neconectat
Member

Membru din: 11 Noi 2009, 19:24
Mesaje: 286
Localitate: Miami, Florida
I need to find out the diameter of the enya 35 wrist pin compared to the OS S35.

_________________
"SAVE ALL THE PIECES"-Phil Brown


Sus
 Profil  
 
 Subiectul mesajului:
MesajScris: 23 Dec 2009, 19:58 
Neconectat
Member
Avatar utilizator

Membru din: 01 Noi 2007, 18:19
Mesaje: 261
Localitate: Bucuresti
Anyway, you must ream to round the holes FIRST. After that you can search a different pin to fit, if you know the diameter and the lenght.


Sus
 Profil  
 
 Subiectul mesajului:
MesajScris: 24 Dec 2009, 20:57 
Neconectat
Member

Membru din: 11 Noi 2009, 19:24
Mesaje: 286
Localitate: Miami, Florida
The biggest problem would be keeping the wrist pin bore square to the piston. That is something you can't do freehand.

_________________
"SAVE ALL THE PIECES"-Phil Brown


Sus
 Profil  
 
 Subiectul mesajului:
MesajScris: 25 Dec 2009, 09:55 
Neconectat
Site Admin
Avatar utilizator

Membru din: 30 Oct 2007, 19:56
Mesaje: 1975
Localitate: Bucuresti
Milled is the best way.

_________________
Magelan, cu rabdare si ciocan!


Sus
 Profil  
 
 Subiectul mesajului:
MesajScris: 26 Dec 2009, 06:39 
Neconectat
Member

Membru din: 11 Noi 2009, 19:24
Mesaje: 286
Localitate: Miami, Florida
For that, you would need a milling machine, not to mention knowing how to use it.

_________________
"SAVE ALL THE PIECES"-Phil Brown


Sus
 Profil  
 
 Subiectul mesajului:
MesajScris: 26 Dec 2009, 17:17 
Neconectat
Member
Avatar utilizator

Membru din: 01 Noi 2007, 18:19
Mesaje: 261
Localitate: Bucuresti
Can you know the dimension of the old pin? Try to find a calibrated reamer that is in range. You can ream the orthogonal hole even using the tool by your hand. It will take some time, but it will be ok. After that, the piston, same way. We can find one good pin for the new dimension.


Sus
 Profil  
 
Afişează mesajele din ultimele:  Sortează după  
Scrie un subiect nou Răspunde la subiect  [ 8 mesaje ] 

Ora este UTC + 2


Cine este conectat

Utilizatorii ce navighează pe acest forum: Niciun utilizator înregistrat şi 12 vizitatori


Nu puteţi scrie subiecte noi în acest forum
Nu puteţi răspunde subiectelor din acest forum
Nu puteţi modifica mesajele dumneavoastră în acest forum
Nu puteţi şterge mesajele dumneavoastră în acest forum
Nu puteţi publica fişiere ataşate în acest forum

Căutare după:
Mergi la:  
cron